5 years 1 month ago - 5 years 1 month ago#12965by pavel_s
The "Match pattern" field applies a filter to the called number (not the calling).
The "CallerID" field in the "Dial Pattern" section applies a filter to the calling number, but does not modify it.
The question is how to modify the calling number.
This can be done through the menu "Extension / Features / Outbound CID",
but, unfortunately, this setting will have to be performed for each extension in the PBX separately.
5 years 1 month ago - 5 years 1 month ago#12971by pavel_s
OK, how to specify a pattern in the field "Route CID", but not a fixed number (not "567202" but "567<Extension>")?
There is also a "PBX / Tnunks / Advanced / Outbound CallerID" field, it is efficient, but you need to know the formats of these fields in order to specify a value with variables.
You can refer to the "Dial Patterns that will use this Route" prompt to config it in Outbound Routes.
if still have any problems, just contact me on skype for better commnication